Tech Support
We are dedicated to providing our customers with the most up to date battery servicing and charger/analyzer maintenance information. Book-mark this page and check back regularly for the latest information available. Please contact us with your technical questions by phone, fax or e-mail at info@marvelaero.com.
General Topics:
Christie Manual Revision List
Battery Shop Set-Up Guidelines (nickel-cadmium batteries)
Thinking about purchasing a used/surplus RF80H?
Ni-Cd Battery Troubleshooting Tips
Series Charging & Discharging – Tech Article – January 2007
ABMS-10X:
ABMS-10X Battery Mangement Software – version 3.6.6
RF80-M Software – current version 2.019 (for ABMS-10X), RF80-M Firmware – current version 2.026 (for ABMS-10X)
AB3000 for ABMS-10Xv3.6.6, v2.043
Current Manual Revision: MA-175 Rev. C (registered users may contact us by email for PDF copies)
ABMS-10X System Diagram with MA24DX
RF80-M:
RF80-M Software, current version, new touch-screen 1.101
RF80-M Firmware (for control board) current version 0.041
RF80-M vs. SuperMasterCharger
RF80-M Service Information Letter, Constant Potential Charging
RF80-M and RF80-K, High Humidity Conditions
RF80-K:
RF80-K Service Bulletin SB# SB040907-001, Lead Acid Discharge Values, April 2007
RF80-K Service Bulletin 081808, Battery Electrolyte Contamination
RF80-K Service Bulletin 082808, Use of NAVAIR 17-20-AX-930
RF80-K Service Information Letter 092308, Operation without Battery Connected
RF80-K Service Bulletin, PC Board Replacement
CASP:
CASP FAQs
CASP Service Information Letter, February 2013 – CRITICAL CALIBRATION INFORMATION
CASP Service Bulletin 27-April 1994
CASP Technical Bulletin – Entering Battery Serial Numbers – December 2006
CDC-65 Calibration Frequency and Maintenance
CASP Service Information Letter, September 2021 – Memory Corrupted or Checksum Error
DataFX:
DataFX Product Bulletin 01-Dec 2005
DataFX Users Guide 10-Aug-2006
DataFX Service Information Letter 18-Feb-2009
BRU28-6:
Current revision of Operator’s Manual MA-195 is rev. B dated 3/24/2015 (registered users may contact us to request PDF of manual)
Current firmware revision 0.34
Product Support Number:
USA – Tel:+1 (949) 829-8264 (available from 0900 to 1700 local, Mon-Fri, GMT -8hrs)
