The NEW CHRISTIE® RF80-M® Aircraft Battery Charger/Analyzer is the latest evolution of the popular RF80 series which has been the worldwide industry standard for decades. The RF80-M is the first product of its kind to feature an advanced microcontroller with touch-screen display.

The RF80-K has remained the industry standard for aircraft battery charger/analyzers for over 20 years. Still in production and fully supported, the RF80-K is replaced by the new RF80-M model with touch-screen display and micro-controller, representing the latest evolution of Christie technology.

The New ABMS-10X Battery Management System provides PC control of up to 10 Christie RF80-M and/or RF80-K Charger/Analyzers on a single PC. Featuring individual cell scanning & diagnostics, battery temperature monitoring and expanded battery processing capability, this user-friendly system represents the latest evolution of our popular ABMS product series.

The MA24DX Cell Clip-Off Module provides a highly convenient and efficient method of applying a 1-ohm shorting resistor across each individual ni-cd cell during the deep cycle process. A total of 24 individually fused discharge channels allow the user to switch on or off the shorting resistor at the desired time.

The BRU28-6 Battery Refresh Unit is a combination, six output, 28 volt DC power source and battery charger. The unit can provide regulated 28 volt DC input power to on-board aircraft emergency power supplies to maintain internal batteries using their internal charging circuitry or it can trickle, slow or float charge main and emergency battery packs during storage or maintenance.

The CASP/2500H is ideally suited for military, aerospace, aviation and critical battery analysis applications. The CASP/2500 is delivered complete with a printer or TD-750 Computer Interface Software and six standard Battery Interface Cables.

This software program will automatically capture your CASP printouts instead of using an EPSON dot matrix serial printer. The printouts are converted to JPEG files which can be viewed, saved, printed or e-mailed as attachments.

The MA950 Charger Management System is a PC interface for the Christie CASP/2500 & CASP/2000 series charger/analyzer. It provides active remote PC control, graphic monitoring of battery processing and convenient download, upload and editing of internal CASP parameter tables.

The Fill-Master is a precision automatic watering system for vented nickel-cadmium aircraft batteries. Using an adjustable feeder, the user can add distilled water to each cell quickly, while recording the exact quantity of water added for hard-copy print-out. The control unit has a standard parallel printer port and can be connected to virtually any parallel printer (not included with unit).